Skip to product information
1 of 1

Zoe Clear Store

PIGADA Stud Finder Wall Scanner and Moisture Tester 2-in-1 Locator 6 Modes Digital Wall Detector for Wood 5CM Precision Metal and Power Lines

PIGADA Stud Finder Wall Scanner and Moisture Tester 2-in-1 Locator 6 Modes Digital Wall Detector for Wood 5CM Precision Metal and Power Lines

Regular price $19.67 USD
Regular price $32.90 USD Sale price $19.67 USD
Sale Sold out
Shipping calculated at checkout.

PIGADA ZK01 2-in-1 Stud Finder Wall Scanner and Moisture Tester


Technical data:
Automatic switch off after approx. 5min.
Working humidity range:
Metal 0-85% RH
Wood 0-60% RH
Copper conductors(live)*0-30% RH
Operating temperature -10 +50
Storage temperature -20 +70
Battery 2*1.5VAAA
Operating lifetime approx. 6h
Product size 134.5*60*25mm

Points For Attention


MODE FOR Wooden
1. The operating environment of the instrument needs to be operated at a humidity of less than 60%RH
2. Before use, the instrument must be calibrated to zero on the detection surface, and the next detection can be performed after 0K
3. There should be no moisture in the operation interface. 4. This instrument is only used for surface detection of gypsum board or homogeneous wood board
5. When operating and moving, try to move slowly and at a uniform speed, not sometimes fast and sometimes slow
6. When operating, let the product purple paste detect the surface, and there must be no up and down shaking
7. Deep mode can be used to detect deeper wooden files

MODE FOR Electrical Conductor


1. The wire to be tested must be a single-strand copper wire
2. The wall, the rubber outside the wire, and the plastic tube covering the wire all have an attenuation effect on the AC signal, so the actual detection depth will be less than 5CM
3. The humidity of the AC detection environment must be less than 30%RH.
4. During the detection process, hands or fingers cannot touch the detection surface.
5. There are steel nets or metal objects on the wires that can shield the AC signal, and the AC may not be detected
6. If the machine beeps in open air, the instrument needs to be calibrated and reset to zero.

Package Include:


AAA Baterries X2
Stud Finder X1
Storage Bag*1
Count Per Pack1 Pc
Brand:PIGADA
Manufacturer Part Number:00016071911015
Manufacturer:PIGADA
View full details